The inner water tray in the air-conditioner has a water level safety switches, it controls the water level. The continuous drainage is not need to be applied when the unit working at the cool or dehumidify mode. The unit can evaporate the condensate water automatically by the splash motor. You can continuous drain the water with a drainage hose(optional) connected to the bottom drain hole, when the unit working at the fan mode. Otherwise the water tray will full when water level reaches an anticipated height.
For most of the portable aircon models, “E4” will be displayed on the LED display to indicate water full. When the water is full, the compressor will automatically stop running to prevent troubles. You can remove the rubber blockage from the drainage hole at the bottom of unit, drain the excessive water with drainage pipe.
If there is a large amount of dust on the net, the air volume will be reduced. If the air filter becomes clogged with dust/dirt, the air filter can be cleaned once every two weeks. It is very easy to take off air filter from the strainer overlay at the side. Clean the air filter with neural detergent in lukewarm water(40℃) and dry it up in the shade.
Environmental Friendly Refrigerant
Avolta Portable Aircon ‘A’ Series uses high efficiency compressor make in Taiwan and uses the R290 non-ozone depletion refrigerant which is in compliant with the European directives on the environment. It is low global warming potential, because it is a natural refrigerant that does not affect the ozone layer, and if emitted to the environment does not represent any harm; furthermore, it has excellent cold transmission properties.
Last 3x longer with the epoxy coated blue fin, this anti-corrosion condenser technology protects the coils against accumulation of water droplets. It discourages corrosion, improve air conditioner performance and increase the lifetime of the appliances.
Comes with the box are extendable window panel, exhaust host and hose adapter. The windows panel can fit on many types of window, whether it is push-out, slider or louver window. Adjust the length of the window slider kit according to the window width or height, and fix it with the dowel. It can be fixed in “horizontal” or “vertical” position depending on the window. Then, mount the hose which already connected to your air outlet, to the window panel to exhaust the heat from your room for a faster cooling experience.
6 Years warranty for Compressor, 1 Year warranty for Parts and 1 year on-site full coverage warranty.